Hercules Version 3: System Messages: PN - Control Panel
This page describes the control panel messages for the Hercules S/370,
ESA/390, and z/Architecture emulator.
Messages
HHCPN001I Control panel thread started: tid=threadid,
pid=processid
- Meaning
- The control panel thread has been started. Its thread id
is
threadid, and its process id is
processid.
- Issued by
- panel.c, function panel_display
HHCPN002S Cannot obtain keyboard buffer: error
- Meaning
- An attempt to obtain memory for the keyboard buffer, used to
hold operator input, failed. The error is described by
error.
- Action
- Correct the error and restart Hercules.
- Issued by
- panel.c, function panel_display
HHCPN003S Cannot obtain message buffer: error
- Meaning
- An attempt to obtain memory for the message buffer, used to
hold operator output, failed. The error is described by
error.
- Action
- Correct the error and restart Hercules.
- Issued by
- panel.c, function panel_display
HHCPN004E select: error
- Meaning
- An error was encountered while waiting for input from the
console. The error is described by
error.
- Action
- Correct the error and retry the operation.
- Issued by
- panel.c, function panel_display
HHCPN005E keyboard read: error
- Meaning
- An error was encountered while attempting to read keyboard
input. The error is described by
error.
- Action
- Correct the error and retry the operation.
- Issued by
- panel.c, function panel_display
HHCPN006E message pipe read: error
- Meaning
- An error was encountered while attempting to read from the pipe used
to communicate to the control panel thread from the rest
of Hercules. The error is described by
error.
- Action
- Correct the error and retry the operation.
- Issued by
- panel.c, function panel_display
HHCPN007E RC file filename open failed: error
- Meaning
- The RC file containing commands to be executed at Hercules
startup, named
filename, could not be opened. The error is described
by error.
- Action
- Correct the error and restart Hercules, if necessary. The commands
contained in the file may be issued manually.
- Issued by
- panel.c, function process_rc_file
HHCPN008I RC file processing thread started using file filename
- Meaning
- Processing of the commands contained in the file named
filename has begun.
- Issued by
- panel.c, function process_rc_file
HHCPN009E RC file buffer malloc failed: error
- Meaning
- An attempt to obtain storage for the buffer for commands being
read from the startup command file failed. The error is described by
error.
- Action
- Correct the error and restart Hercules, if needed. The comands
contained in the file may be issued manually.
- Issued by
- panel.c, function process_rc_file
HHCPN010W Ignoring invalid RC file pause statement: argument
- Meaning
- The argument,
argument, on the pause statement
in the startup command file is invalid. It must be a decimal
number between 0 and 999. Processing will continue without any pause.
- Action
- Correct the invalid argument and restart Hercules, if desired.
- Issued by
- panel.c, function process_rc_file
HHCPN011I Pausing RC file processing for delay seconds...
- Meaning
- Processing of the startup command file
is being delayed for
delay seconds because of a pause
statement in the file.
- Issued by
- panel.c, function process_rc_file
HHCPN012I Resuming RC file processing...
- Meaning
- Processing of the startup command file has resumed at the expiration
of the delay interval.
- Issued by
- panel.c, function process_rc_file
HHCPN013I EOF reached on RC file. Processing complete.
- Meaning
- The end of the startup command file has been reached, and processing
of the file is complete.
- Issued by
- panel.c, function process_rc_file
HHCPN014E I/O error reading RC file: error
- Meaning
- An error was encountered while reading a command
from the startup command file. The error is described by
error. Any remaining commands in the file will not be processed.
- Action
- Correct the error and restart Hercules, if
desired. Any unprocessed commands may be issued manually.
- Issued by
- panel.c, function process_rc_file
HHCPN052E Target CPU nnnn type cputype does not allow ipl
- Meaning
- An ipl command was issued but the target CPU
nnnn
is a processor engine of type cputype which does
not support the initial program load procedure.
- Action
- Use the cpu command to set the target CPU to a processor of type CP,
IFL, or ICF, then re-issue the ipl command.
- Issued by
- hsccmd.c, function ipl_cmd2
HHCPN180E 'sh' commands are disabled
- Meaning
- The 'sh' (shell) command has been purposely disabled
via a SHCMDOPT configuration file statement. Shell commands
entered via the Hercules hardware console will not be processed.
- Action
- Remove or modify the SHCMDOPT configuration file statement
and restart Hercules.
- Issued by
- hsccmd.c, function sh_cmd
HHCPN181E Device number s:CCUU not found
- Meaning
- The device number
CCUU
on Logical Channel Subsystem s
was not found in the configuration.
- Action
- Reissue the command with an existing device number.
- Issued by
- hsccmd.c, Multiple functions
If you have a question about Hercules, see the
Hercules Frequently-Asked Questions page.
Last updated $Date: 2008-11-25 23:00:11 +0000 (Tue, 25 Nov 2008) $ $Revision: 4920 $