HHCCA001I CCUU:Connect out to ipaddr:port failed during initial status : System Cause Text
- Explanation
- HERCULES attempted to make an outgoing TCP connection to ipaddr:port, but the system indicated that there was an error while processing the request.
- System Action
- The DIAL or ENABLE CCW that caused the connection attempt ends with Unit Check and Intervention Required. The reason for the failure is indicated in the System Cause Text field
- Operator Action
- None
- Programmer Action
- Correct the RHOST/RPORT configuration statements in the configuration file. If this message occured during a program initiated DIAL, correct the dial data.
- Module
- commadpt.c
- Function
- commadpt_connout
HHCCA002I CCUU:Line Communication thread thread id started
- Explanation
- The thread responsible for asynchronous operations for the BSC emulated line CCUU has been started.
- System Action
- The system continues
- Operator Action
- None. This is an informational message
- Programmer Action
- None. This is an informational message
- Module
- commadpt.c
- Function
- commadpt_thread
HHCCA003E CCUU:Cannot obtain socket for incoming calls : System Cause Text
- Explanation
- A system error occured while attempting to create a socket to listen for incoming calls.
- System Action
- The device creation is aborted.
- Operator Action
- None.
- Programmer Action
- Check the System Cause Text for any information relating to the host system. Notify support.
- Module
- commadpt.c
- Function
- commadpt_thread
HHCCA004W CCUU:Waiting 5 seconds for port port to become available
- Explanation
- While attempting to reserve port port to listen to it, the system indicated the port was already being used.
- System Action
- The system waits 5 seconds and then retries the operation
- Operator Action
- Terminate the device if the port is in error
- Programmer Action
- Determine the program holding the specified port. If the port cannot be made available, use a different port.
HHCCA005I CCUU:Listening on port port for incoming TCP connections
- Explanation
- The system is now listening on port port for incoming a tcp connection.
- System Action
- The system continues
- Operator Action
- None. This is an informational message
- Programmer Action
- None. This is an informational message
HHCCA006T CCUU:Select failed : System Cause Text
- Explanation
- An error occured during a 'select' system call.
- System Action
- The BSC thread is terminated
- Operator Action
- None.
- Programmer Action
- Check the System Cause Text for any indication of where the error might come from. Notify Support.
HHCCA007W CCUU:Outgoing call failed during ENABLE|DIAL command : System Cause Text
- Explanation
- The system reported that a previously initiated TCP connection could not be completed
- System Action
- The I/O operation responsible for the TCP outgoing connection is ended with Unit Check and Intervention Required.
- Operator Action
- If the error indicates that the error is temporary, retry the operation.
- Programmer Action
- Check that the destination for this line is correctly configured. If the operation was a DIAL attempt, check in the application configuration or operation data.
HHCCA008I CCUU:cthread - Incoming Call
- Explanation
- The BSC thread has received an incoming call.
- System Action
- Depending on configuration and operational status, the call is either accepted or rejected. Eventually, an ongoign I/O operation may complete.
- Operator Action
- None. This is an informational message
- Programmer Action
- None. This is an informational message
HHCCA009I CCUU:BSC utility thread terminated
- Explanation
- The BSC thread has ended
- System Action
- the system continue.
- Operator Action
- Refer to any previous error message if this message was not unexpected
- Programmer Action
- Refer to any previous error message if this message was not unexpected
HHCCA010I CCUU:initialisation not performed
- Explanation
- The Device initialisation process has failed.
- System Action
- the system terminates or continues, depending on the reason for which the device was initialisation was initiated.
- Operator Action
- Refer to any previous error message
- Programmer Action
- Refer to any previous error message
HHCCA011E CCUU:Error parsing Keyword
- Explanation
- The device keyword parser found an error while parsing a known keyword.
- System Action
- The system continues. The device initialisation routine turns on a NOGO flag.
- Operator Action
- for a runtime initialisation, correct the device initialisation parameters, otherwise notify the programmer.
- Programmer Action
- For an engine initialisation, correct the device configuration parameters in the configuration file.
HHCCA012E CCUU:Unrecognized parameter Keyword
- Explanation
- The device keyword parser found an unknown keyword in the device parameter list.
- System Action
- The system continues. The device initialisation routine turns on a NOGO flag.
- Operator Action
- for a runtime initialisation, correct the device initialisation parameters, otherwise notify the programmer.
- Programmer Action
- For an engine initialisation, correct the device configuration parameters in the configuration file.
HHCCA013E CCUU:Incorrect local port|remote port|local host|remote host specification value
- Explanation
- The device initialisation routine could not correctly parse a parameter value.
- System Action
- The system continues. The device initialisation routine turns on a NOGO flag.
- Operator Action
- for a runtime initialisation, correct the device initialisation parameters, otherwise notify the programmer.
- Programmer Action
- For an engine initialisation, correct the device configuration parameters in the configuration file.
HHCCA014E CCUU:Incorrect switched/dial specification value; defaulting to DIAL=OUT
- Explanation
- The device initialisation routine found an incorrect DIAL value.
- System Action
- The system continues. The device initialisation routine turns on a NOGO flag.
- Operator Action
- for a runtime initialisation, correct the device initialisation parameters, otherwise notify the programmer.
- Programmer Action
- For an engine initialisation, correct the device configuration parameters in the configuration file.
HHCCA015E CCUU:Missing parameter : DIAL=NO|IN|OUT|INOUT and LPORT|RPORT|LHOST|RHOST not specified
- Explanation
- The device initialisation routine found that a mandatory parameter was not provided for a specific DIAL Value.
- System Action
- The system continues. The device initialisation routine turns on a NOGO flag.
- Operator Action
- for a runtime initialisation, correct the device initialisation parameters, otherwise notify the programmer.
- Programmer Action
- For an engine initialisation, correct the device configuration parameters in the configuration file.
- Note
-
For DIAL=NO , LPORT, RPORT and RHOST are needed
- For DIAL=IN , LPORT is required
- For DIAL=OUT None of LPORT,LHOST,RPORT,RHOST are required
- For DIAL=INOUT, LPORT is required
- For DIAL=IN , LPORT is required
HHCCA016W CCUU:Conflicting parameter : DIAL=NO|IN|OUT|INOUT and LPORT|RPORT|LHOST|RHOST=value specified
- Explanation
- The device initialisation routine found that a parameter was provided for a parameter that is not relevant for a specific DIAL Value.
- System Action
- The parameter is ignored. The system continues
- Operator Action
- for a runtime initialisation, correct the device initialisation parameters, otherwise notify the programmer.
- Programmer Action
- For an engine initialisation, correct the device configuration parameters in the configuration file.
- Note
- For DIAL=IN , RPORT and RHOST are ignored
- For DIAL=OUT , LPORT, LHOST, RPORT and RHOST are ignored
- For DIAL=INOUT, RPORT and RHOST are ignored
- For DIAL=OUT , LPORT, LHOST, RPORT and RHOST are ignored
HHCCA017I CCUU:LPORT|RPORT|LHOST|RHOST parameter ignored
- Explanation
- The system indicates that the parameter specified is ignored. This message is preceeded by message HHCCA016W
- System Action
- The system continues
- Operator Action
- None
- Programmer Action
- None
HHCCA018E CCUU:Bind failed : System Cause Text
- Explanation
- While attempting to bind a socket to a specific host/port, the host system returned an uncorrectable error.
- System Action
- BSC Thread terminates
- Operator Action
- None
- Programmer Action
- Check that the LHOST parameter for this device is indeed a local IP address. Otherwise, notify support.
HHCCA019E CCUU:BSC comm thread did not initialise
- Explanation
- The BSC communication thread reported that it terminated while the device was initialising.
- System Action
- The device is not initialised.
- Operator Action
- Check for any previously issued error message.
- Programmer Action
- Check for any previously issued error message.
HHCCA020E CCUU:Memory allocation failure for main control block
- Explanation
- A memory allocation failure occured while attempting to reserve memory for the Communication Adapter control block
- System Action
- The device is not initialised.
- Operator Action
- None
- Programmer Action
- Contact support
HHCCA021I CCUU:Initialisation failed due to previous errors
- Explanation
- The initialisation process for device CCUU did not complete succesfully
- System Action
- The device is not initialised
- Operator Action
- None
- Programmer Action
- Refer to any previous error message
HHCCA300D Debug Message
- Explanation
- This is a debug message. CCW Tracing has been turned on for this device and the Line Handler issues debug messages to help diagnose interface, conformance and protocol issues.
- System Action
- The system continues
- Operator Action
- If the debug messages are no longer necessary, turn off CCW tracing (panel command : 't-CCUU').
- Programmer Action
- None
If you have a question about Hercules, see the Hercules Frequently-Asked Questions page.
Last updated $Date: 2007-10-06 19:44:28 +0000 (Sat, 06 Oct 2007) $ $Revision: 4460 $